niXforums Forum Index
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   PreferencesPreferences   Log in to check your private messagesLog in to check your private messages   Log inLog in 
·  nixdoc.net ·  man pages ·  Linux HOWTOs ·  FreeBSD Tips ·  Forums
navigation Forum index » *nix » Linux » powerpc
Any PPC live CDs?
Post new topic   Reply to topic Page 1 of 1 [15 Posts] View previous topic :: View next topic
Author Message
PastaLover
*nix forums beginner


Joined: 26 Jun 2006
Posts: 4

PostPosted: Mon Jun 26, 2006 2:59 am    Post subject: Any PPC live CDs? Reply with quote

Hello all,

I want to run Linux on an underutilized PowerMac and I'd like to "test
drive" it before wiping the hard disk and installing.

Are there any distributions for PPC that are live CDs?

Thanks.
Back to top
Thorsten Gunkel
*nix forums beginner


Joined: 15 Nov 2005
Posts: 8

PostPosted: Mon Jun 26, 2006 4:40 am    Post subject: Re: Any PPC live CDs? Reply with quote

PastaLover <photodoglv@yahoo.com> wrote:
Quote:
I want to run Linux on an underutilized PowerMac and I'd like to "test
drive" it before wiping the hard disk and installing.
Are there any distributions for PPC that are live CDs?

Ubuntu?

Quote:
Thanks.

regards
Thorsten
--
http://www.tgunkel.de
Back to top
linuxiac
*nix forums beginner


Joined: 11 May 2006
Posts: 8

PostPosted: Mon Jun 26, 2006 11:57 am    Post subject: Re: Any PPC live CDs? Reply with quote

Thorsten Gunkel wrote:
Quote:
PastaLover <photodoglv@yahoo.com> wrote:

I want to run Linux on an underutilized PowerMac and I'd like to "test
drive" it before wiping the hard disk and installing.
Are there any distributions for PPC that are live CDs?


Ubuntu?


Thanks.


regards
Thorsten

Go to http://livecdlist.com and select PPC in the search criteria.

HUGE number of them!
Back to top
PastaLover
*nix forums beginner


Joined: 26 Jun 2006
Posts: 4

PostPosted: Mon Jun 26, 2006 1:25 pm    Post subject: Re: Any PPC live CDs? Reply with quote

linuxiac wrote:
Quote:
Thorsten Gunkel wrote:

PastaLover <photodoglv@yahoo.com> wrote:

I want to run Linux on an underutilized PowerMac and I'd like to
"test drive" it before wiping the hard disk and installing.
Are there any distributions for PPC that are live CDs?



Ubuntu?


Thanks.



regards
Thorsten


Go to http://livecdlist.com and select PPC in the search criteria.

HUGE number of them!

Thanks to both of you.

I found Ubuntu, and burned a CD. But it didn't really work too well. The
file manager wouldn't start, and about half of the apps died during
launch with a bunch of different error codes.

This PowerMac only has 256 MB of RAM, so I'm guessing it just isn't
powerful enough to support a full-fledged Linux distribution. Haven't
had a chance yet to try it on my iBook with 512 MB.

I'll check out the URL and explore some more.
Back to top
Alf
*nix forums beginner


Joined: 22 Feb 2005
Posts: 17

PostPosted: Mon Jun 26, 2006 5:07 pm    Post subject: Re: Any PPC live CDs? Reply with quote

PastaLover schrieb:
Quote:
linuxiac wrote:

Thorsten Gunkel wrote:

PastaLover <photodoglv@yahoo.com> wrote:

I want to run Linux on an underutilized PowerMac and I'd like to
"test drive" it before wiping the hard disk and installing.
Are there any distributions for PPC that are live CDs?




Ubuntu?


Thanks.




regards
Thorsten



Go to http://livecdlist.com and select PPC in the search criteria.

HUGE number of them!


Thanks to both of you.

I found Ubuntu, and burned a CD. But it didn't really work too well. The
file manager wouldn't start, and about half of the apps died during
launch with a bunch of different error codes.

This PowerMac only has 256 MB of RAM, so I'm guessing it just isn't
powerful enough to support a full-fledged Linux distribution. Haven't
had a chance yet to try it on my iBook with 512 MB.

I'll check out the URL and explore some more.

Just to let you know: on my tangerine iBook with 160 MB RAM, ubuntu 5.10
runs without probs. Even the live CD does work. 256 MB are definitly
enough to run a linux distribution.

Alf
Back to top
I R A Darth Aggie
*nix forums beginner


Joined: 23 Mar 2005
Posts: 36

PostPosted: Mon Jun 26, 2006 5:22 pm    Post subject: Re: Any PPC live CDs? Reply with quote

On Mon, 26 Jun 2006 06:25:16 -0700,
PastaLover <photodoglv@yahoo.com>, in
<5fRng.15194$_c1.9104@fed1read05> wrote:

Quote:
+ This PowerMac only has 256 MB of RAM, so I'm guessing it just isn't
+ powerful enough to support a full-fledged Linux distribution.

That's adequate. Granted, you may want to run fluxbox instead of GNOME
or KDE. And more memory would be nice, but what you have should be
sufficient. Which PowerMac are you trying this on?

--
Consulting Minister for Consultants, DNRC
I can please only one person per day. Today is not your day. Tomorrow
isn't looking good, either.
I am BOFH. Resistance is futile. Your network will be assimilated.
Back to top
Jack Malmostoso
*nix forums addict


Joined: 06 Mar 2005
Posts: 60

PostPosted: Mon Jun 26, 2006 6:21 pm    Post subject: Re: Any PPC live CDs? Reply with quote

On Mon, 26 Jun 2006 06:25:16 -0700, PastaLover wrote:

Quote:
This PowerMac only has 256 MB of RAM, so I'm guessing it just isn't
powerful enough to support a full-fledged Linux distribution. Haven't had
a chance yet to try it on my iBook with 512 MB.

A live cd is surely more RAM intensive than a full install, but 256megs
should be enough.
I would check carefully the hardware and the MD5SUM of the burned CD.

If you want to try a lighter livecd, try Xubuntu (same codebase of Ubuntu
but with a lighter desktop).

--
Best Regards, Jack
Linux User #264449
Powered by Debian GNU/Linux on AMD64
Back to top
Thorsten Gunkel
*nix forums beginner


Joined: 15 Nov 2005
Posts: 8

PostPosted: Mon Jun 26, 2006 7:39 pm    Post subject: Re: Any PPC live CDs? Reply with quote

PastaLover <photodoglv@yahoo.com> wrote:
Quote:
linuxiac wrote:
Thorsten Gunkel wrote:
Ubuntu?
I found Ubuntu, and burned a CD. But it didn't really work too well. The
file manager wouldn't start, and about half of the apps died during
launch with a bunch of different error codes.
This PowerMac only has 256 MB of RAM, so I'm guessing it just isn't
powerful enough to support a full-fledged Linux distribution. Haven't
had a chance yet to try it on my iBook with 512 MB.

If you have any partitions with rw access create a swapfile and test again.

regards
Thorsten
--
http://www.tgunkel.de
Back to top
PastaLover
*nix forums beginner


Joined: 26 Jun 2006
Posts: 4

PostPosted: Mon Jun 26, 2006 8:20 pm    Post subject: Re: Any PPC live CDs? Reply with quote

I R A Darth Aggie wrote:
Quote:
On Mon, 26 Jun 2006 06:25:16 -0700,
PastaLover <photodoglv@yahoo.com>, in
5fRng.15194$_c1.9104@fed1read05> wrote:


+ This PowerMac only has 256 MB of RAM, so I'm guessing it just isn't
+ powerful enough to support a full-fledged Linux distribution.


That's adequate. Granted, you may want to run fluxbox instead of GNOME
or KDE. And more memory would be nice, but what you have should be
sufficient. Which PowerMac are you trying this on?

It's a aluminum 12" PowerBook that's a couple years old.
Back to top
Jerry Heyman
*nix forums beginner


Joined: 23 Feb 2005
Posts: 5

PostPosted: Tue Jun 27, 2006 12:29 am    Post subject: Re: Any PPC live CDs? Reply with quote

on Monday 26 June 2006 01:22 pm, hfrarg@nttvr2x3.pbgfr.arg (I R A Darth
Aggie) wrote:

Quote:
On Mon, 26 Jun 2006 06:25:16 -0700,
PastaLover <photodoglv@yahoo.com>, in
5fRng.15194$_c1.9104@fed1read05> wrote:

+ This PowerMac only has 256 MB of RAM, so I'm guessing it just isn't
+ powerful enough to support a full-fledged Linux distribution.

That's adequate. Granted, you may want to run fluxbox instead of GNOME
or KDE. And more memory would be nice, but what you have should be
sufficient. Which PowerMac are you trying this on?

I have an old world beige powermac 8500/90 (upgraded to a 225MHz PPC 603),
but can't figure out how to make it boot directly from CD. Any advice??

Quote:


jerry
--
// Jerry Heyman | "Software is the difference between
// Amiga Forever Smile | hardware and reality"
\\ // heymanj@acm.org |
\X/ http://bellsouthpwp.net/h/e/heymanj/
Back to top
I R A Darth Aggie
*nix forums beginner


Joined: 23 Mar 2005
Posts: 36

PostPosted: Tue Jun 27, 2006 9:59 pm    Post subject: Re: Any PPC live CDs? Reply with quote

On Mon, 26 Jun 2006 20:29:24 -0400,
Jerry Heyman <jerry@hobbeshollow.com>, in
<2925626.m67jy6zM3u@unix.hobbeshollow.com> wrote:

Quote:
+ I have an old world beige powermac 8500/90 (upgraded to a 225MHz PPC 603),
+ but can't figure out how to make it boot directly from CD. Any advice??

I take it that you've tried the "press the C key on the keyboard
during boot up"? does the machine ignore you, or does it at least
*try* to load the CD?

And there is ... variablity ... between CD drives and CD-R/RW media,
and that could be bitting you, too. I've had CD-RWs that would boot
many machines, but often enough I'll find a hardware set that
absolutely refuses to boot from that CD-RW that's know good.

Don't know if that's dust, alignment, firmware, or just a random act
of Dog.

--
Consulting Minister for Consultants, DNRC
I can please only one person per day. Today is not your day. Tomorrow
isn't looking good, either.
I am BOFH. Resistance is futile. Your network will be assimilated.
Back to top
Jerry Heyman
*nix forums beginner


Joined: 23 Feb 2005
Posts: 5

PostPosted: Wed Jun 28, 2006 12:34 am    Post subject: Re: Any PPC live CDs? Reply with quote

on Tuesday 27 June 2006 05:59 pm, hfrarg@nttvr2x3.pbgfr.arg (I R A Darth
Aggie) wrote:

Quote:
On Mon, 26 Jun 2006 20:29:24 -0400,
Jerry Heyman <jerry@hobbeshollow.com>, in
2925626.m67jy6zM3u@unix.hobbeshollow.com> wrote:

+ I have an old world beige powermac 8500/90 (upgraded to a 225MHz
PPC 603), but can't figure out how to make it boot directly from CD.
Any advice??

I take it that you've tried the "press the C key on the keyboard
during boot up"? does the machine ignore you, or does it at least
*try* to load the CD?

no - it doesn't even attempt to load it. I've been told by others
that 'old world' machines don't handle the C key during boot :-(

http://developer.apple.com/technotes/tn/tn1167.html#Section5

Quote:

And there is ... variablity ... between CD drives and CD-R/RW media,
and that could be bitting you, too. I've had CD-RWs that would boot
many machines, but often enough I'll find a hardware set that
absolutely refuses to boot from that CD-RW that's know good.

Don't know if that's dust, alignment, firmware, or just a random act
of Dog.

firmware Sad searching the web shows *lots* of work rounds that
you can install on Mac OS 9.x to then boot to Linux/MacX...

jerry
--
// Jerry Heyman | "Software is the difference between
// Amiga Forever Smile | hardware and reality"
\\ // heymanj@acm.org |
\X/ http://bellsouthpwp.net/h/e/heymanj/
Back to top
linuxiac
*nix forums beginner


Joined: 11 May 2006
Posts: 8

PostPosted: Wed Jun 28, 2006 11:00 am    Post subject: Re: Any PPC live CDs? Reply with quote

Thorsten Gunkel wrote:
Quote:
PastaLover <photodoglv@yahoo.com> wrote:

linuxiac wrote:

Thorsten Gunkel wrote:

Ubuntu?

I found Ubuntu, and burned a CD. But it didn't really work too well. The
file manager wouldn't start, and about half of the apps died during
launch with a bunch of different error codes.
This PowerMac only has 256 MB of RAM, so I'm guessing it just isn't
powerful enough to support a full-fledged Linux distribution. Haven't
had a chance yet to try it on my iBook with 512 MB.


If you have any partitions with rw access create a swapfile and test again.

regards
Thorsten
When I have had a problem with any of my 90 Live CDroms on any of the

100 systems I tried this year, the problem has been that the CD burning
program I used (Ahead Nero, in an XP Pro system on an AMD 2.0 -1.667 Ghz
w/512Mb RAM) and also in K3B on PCLinux or Kubuntu, the same problem
seems to be at the root cause...

A CDrom that is to be read in different CD machines on different systems
needs to have al the blank space 'PADDED'! None of those burning
programs state it up front. The standards discuss the problem and
recommend the padding!

To create a LIVECD that is universally readable, you have to implement
the burn of any ISO with command line interface in a console, using pad
63s. THIS IS A CRITICAL FUNCTION to get CDs that are NOT coasters!!!

Here is the straight skinny:

http://www.troubleshooters.com/linux/coasterless.htm

I personally know Steve Litt, and highly respect this technical writer
(major contributor to such books as SAM's "Unleashed" series on SAMBA,
and, other works in the SAM's line. Also, if ever in Central Florida,
visit the GOLUG http://golug.org

It would behoove you to get his latest work on troubleshooting! It will
organize some of the thinking about the process of tracking down any
problem.

I have some MacIntosh gear, dated and older, from a 6320CD up to a PPC
603 based 6500, and am studying to become Apple Certified as a tech.
So, with my ten years of Linux advocasy, I want to make these older
machines run in the more modern world, as OS7.5 to OS9 are aging.

My major goal is file compatability on my network...
Back to top
PastaLover
*nix forums beginner


Joined: 26 Jun 2006
Posts: 4

PostPosted: Thu Jun 29, 2006 1:28 am    Post subject: Re: Any PPC live CDs? Reply with quote

linuxiac wrote:
Quote:
Thorsten Gunkel wrote:

PastaLover <photodoglv@yahoo.com> wrote:

linuxiac wrote:

Thorsten Gunkel wrote:

Ubuntu?


I found Ubuntu, and burned a CD. But it didn't really work too well.
The file manager wouldn't start, and about half of the apps died
during launch with a bunch of different error codes.
This PowerMac only has 256 MB of RAM, so I'm guessing it just isn't
powerful enough to support a full-fledged Linux distribution. Haven't
had a chance yet to try it on my iBook with 512 MB.



If you have any partitions with rw access create a swapfile and test
again.

regards
Thorsten

When I have had a problem with any of my 90 Live CDroms on any of the
100 systems I tried this year, the problem has been that the CD burning
program I used (Ahead Nero, in an XP Pro system on an AMD 2.0 -1.667 Ghz
w/512Mb RAM) and also in K3B on PCLinux or Kubuntu, the same problem
seems to be at the root cause...

A CDrom that is to be read in different CD machines on different systems
needs to have al the blank space 'PADDED'! None of those burning
programs state it up front. The standards discuss the problem and
recommend the padding!

To create a LIVECD that is universally readable, you have to implement
the burn of any ISO with command line interface in a console, using pad
63s. THIS IS A CRITICAL FUNCTION to get CDs that are NOT coasters!!!

Here is the straight skinny:

http://www.troubleshooters.com/linux/coasterless.htm

I personally know Steve Litt, and highly respect this technical writer
(major contributor to such books as SAM's "Unleashed" series on SAMBA,
and, other works in the SAM's line. Also, if ever in Central Florida,
visit the GOLUG http://golug.org

It would behoove you to get his latest work on troubleshooting! It will
organize some of the thinking about the process of tracking down any
problem.

I have some MacIntosh gear, dated and older, from a 6320CD up to a PPC
603 based 6500, and am studying to become Apple Certified as a tech. So,
with my ten years of Linux advocasy, I want to make these older machines
run in the more modern world, as OS7.5 to OS9 are aging.

My major goal is file compatability on my network...

Thanks for the advice. This might very well be the issue. The PowerBook
seemed to read the CDROM excessively and got extremely hot.

I'll try burning the CD at work using a better CD burning program. The
one I used on my XP machine at home is pretty "idiot proof" and doesn't
give you the ability to set a lot of various options.
Back to top
Jens Ayton
*nix forums beginner


Joined: 01 Jul 2006
Posts: 1

PostPosted: Sat Jul 01, 2006 3:20 pm    Post subject: Re: Piggyback - Any PPC live CDs? Reply with quote

I've been meaning to get around to getting Linux working on my Rev B
iMac (G3/233, 192 MB RAM) and this thread provided the impetus. I’ve
burned an Xubuntu live CD, and the machine recognises it. However, after
the init messages run, the screen goes black with a caret in the top
corner for a few seconds, then the display switches off and the power
light turns amber. It appears to be loading for a while after this, but
no amount of key-whacking or mouse-twiddling will wake it.

When run with the live-nosplash option, the last init message says:
*Starting ppbuttonsd
ERROR: The file '/dev/pmu' could not be found. [fail]

....which suggests the OS is unaware of the machine's power management
features and thus is not explicitly putting it to sleep, and also has no
knowledge of how to stop it from sleeping.

The only thing I could think of was to switch off sleep and display
sleep from within Mac OS, but this had no effect. Any ideas to fix this,
or suggestions of live CDs that work on rev B iMacs?


--
Jens Ayton
Back to top
Google

Back to top
Display posts from previous:   
Post new topic   Reply to topic Page 1 of 1 [15 Posts] View previous topic :: View next topic
The time now is Tue Dec 02, 2008 1:50 pm | All times are GMT
navigation Forum index » *nix » Linux » powerpc
Jump to:  

Similar Topics
Topic Author Forum Replies Last Post
No new posts Live Upgrade and vxvm Ceri Davies Solaris 2 Tue Jul 18, 2006 9:00 pm
No new posts live vedio happy PHP 1 Thu Jul 06, 2006 6:53 am
No new posts live upgrade with none global zones Arno Schneider Solaris 0 Tue Jun 27, 2006 3:16 pm
No new posts Bootable Linux CD, preferably live CD, for Sun Ultra 5 wi... Nico Kadel-Garcia Setup 0 Wed Jun 21, 2006 12:30 pm
No new posts MPI tutorial live Malcolm C 1 Fri Jun 16, 2006 7:07 pm

Cingular Ringtones | Coin Community | Property for sale in Spain | Anime Downloads | Remortgages
Copyright © 2004-2005 DeniX Solutions SRL
 
Other DeniX Solutions sites: Unix/Linux blog |  electronics forum |  medicine forum |  science forum | 
Privacy Policy


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 1.4179s ][ Queries: 16 (1.2599s) ][ GZIP on - Debug on ]