|
|
|
|
|
|
| Author |
Message |
pooklaroux
*nix forums beginner
Joined: 10 Mar 2006
Posts: 4
|
 Posted: Fri Mar 10, 2006 6:03 pm Post subject:
Help choosing a distribution
|
|
|
Hi, I'm new to linux, but I have some experience supporting unix
servers. I've decided I want to explore linux for use on my home
systems, and I have an older powerbook 3400 that is not being used.
(actually, it might be a G3, I swapped out the case a while back. I'll
have to boot it up to see.) I also have a 2400 that is not being used.
The newer part of our system is based on ibooks and an imac. Because
I'm a starving artist type, I almost never buy the newest hardware, and
it occurred to me that linux might be a better choice for us because
with Mac OS we are always a few releases behind, wheras with linux we
might be able to run newer apps. I'm always playing with older bits of
hardware, and I just thought it might be fun in any case.
Can anyone advise me about a distribution for my purposes? I have an
old old copy of Suse (7.0) but I don't think that can be run on a
powerbook. I looked at OpenSuse 10.0 but I am not sure that would work
on the older systems. I'm thinking maybe Debian? The only other
person I know who runs linux on a mac runs Yellow Dog, and he has a
much newer system overall, so I am not sure his advice is good for me.
Also, can anyone point me to a resource for learning about configuring
a very small efficient installation, like say something I could put on
the 2400?
Thanks! Hope you don't mind a newbie on the list. |
|
| Back to top |
|
 |
Keith Keller
*nix forums Guru
Joined: 20 Feb 2005
Posts: 608
|
| Posted: Fri Mar 10, 2006 7:17 pm Post subject:
Re: Help choosing a distribution
|
|
|
On 2006-03-10, pooklaroux <pooklaroux@earthlink.net> wrote:
| Quote: | Hi, I'm new to linux, but I have some experience supporting unix
servers. I've decided I want to explore linux for use on my home
systems, and I have an older powerbook 3400 that is not being used.
(actually, it might be a G3, I swapped out the case a while back. I'll
have to boot it up to see.) I also have a 2400 that is not being used.
The newer part of our system is based on ibooks and an imac. Because
I'm a starving artist type, I almost never buy the newest hardware, and
it occurred to me that linux might be a better choice for us because
with Mac OS we are always a few releases behind, wheras with linux we
might be able to run newer apps. I'm always playing with older bits of
hardware, and I just thought it might be fun in any case.
Can anyone advise me about a distribution for my purposes? I have an
old old copy of Suse (7.0) but I don't think that can be run on a
powerbook. I looked at OpenSuse 10.0 but I am not sure that would work
on the older systems. I'm thinking maybe Debian? The only other
person I know who runs linux on a mac runs Yellow Dog, and he has a
much newer system overall, so I am not sure his advice is good for me.
|
Well, you will run into some issues with older powerbooks. The first
(not knowing off the top of my head model numbers) will be whether the
processor is PPC or not. If the machines are *really* old, running the
68000 series processor, forget about all these distros, which are only
for the powerpc.
Second, and more likely, is what version of OpenFirmware the boxes have.
If they have 1.x, then you'd need to install quik or BootX, not yaboot,
to boot them. Many distros won't automatically configure quik, and some
machines won't take quik easily. From experience, I'd recommend against
doing your first linux-ppc install on older PPC boxes. You'll want
OpenFirmware 3.x or later to be able to use yaboot, which is very
standard and easy to install across computers and distributions.
| Quote: | Also, can anyone point me to a resource for learning about configuring
a very small efficient installation, like say something I could put on
the 2400?
|
If you're used to a unix world, you might want to try Slackintosh. It's
already pretty minimal, so you wouldn't need to cut it down too much to
get it to run well. Beyond that, any docs concerning paring down a
linux install will be applicable.
| Quote: | Thanks! Hope you don't mind a newbie on the list.
|
Just to be pedantic, it's a newsgroup, not a list.  Good luck!
--keith
--
kkeller-usenet@wombat.san-francisco.ca.us
(try just my userid to email me)
AOLSFAQ=http://wombat.san-francisco.ca.us/cgi-bin/fom
see X- headers for PGP signature information |
|
| Back to top |
|
|
pooklaroux
*nix forums beginner
Joined: 10 Mar 2006
Posts: 4
|
| Posted: Fri Mar 10, 2006 7:33 pm Post subject:
Re: Help choosing a distribution
|
|
|
Thanks Keith!
All my old world macs are ppc, I'm not saying I won't pick up an old
nubus mac if it's free or cheap. but what I have left right now all
runs Mac os 8.6 reliably, and they would run 9 if I put more ram into
them.
I'll go look to see what the open firmware is on the systems i have
free. Ease of installation can be a real advantage.
And you are the first person to recommend slackintosh -- I was curious
about that. I'll check it out. |
|
| Back to top |
|
|
toby
*nix forums addict
Joined: 01 Jul 2005
Posts: 87
|
| Posted: Sun Mar 12, 2006 1:08 am Post subject:
Re: Help choosing a distribution
|
|
|
Keith Keller wrote:
| Quote: | On 2006-03-10, pooklaroux <pooklaroux@earthlink.net> wrote:
Hi, I'm new to linux, but I have some experience supporting unix
servers. I've decided I want to explore linux for use on my home
systems, and I have an older powerbook 3400 that is not being used.
(actually, it might be a G3, I swapped out the case a while back. I'll
have to boot it up to see.) I also have a 2400 that is not being used.
The newer part of our system is based on ibooks and an imac. Because
I'm a starving artist type, I almost never buy the newest hardware, and
it occurred to me that linux might be a better choice for us because
with Mac OS we are always a few releases behind, wheras with linux we
might be able to run newer apps. I'm always playing with older bits of
hardware, and I just thought it might be fun in any case.
Can anyone advise me about a distribution for my purposes? I have an
old old copy of Suse (7.0) but I don't think that can be run on a
powerbook. I looked at OpenSuse 10.0 but I am not sure that would work
on the older systems. I'm thinking maybe Debian? The only other
person I know who runs linux on a mac runs Yellow Dog, and he has a
much newer system overall, so I am not sure his advice is good for me.
Well, you will run into some issues with older powerbooks. The first
(not knowing off the top of my head model numbers) will be whether the
processor is PPC or not. If the machines are *really* old, running the
68000 series processor, forget about all these distros, which are only
for the powerpc.
Second, and more likely, is what version of OpenFirmware the boxes have.
If they have 1.x, then you'd need to install quik or BootX, not yaboot,
to boot them. Many distros won't automatically configure quik, and some
machines won't take quik easily. From experience, I'd recommend against
doing your first linux-ppc install on older PPC boxes. You'll want
OpenFirmware 3.x or later to be able to use yaboot, which is very
standard and easy to install across computers and distributions.
|
Yes - I would recommend a New World system - G3 or later; failing that,
a PCI, not NuBus Mac. 7600 or PowerCenter upgraded to G3 has served me
well running LinuxPPC. NuBus will, sadly, not get you where you want to
go.
| Quote: |
Also, can anyone point me to a resource for learning about configuring
a very small efficient installation, like say something I could put on
the 2400?
If you're used to a unix world, you might want to try Slackintosh. It's
already pretty minimal, so you wouldn't need to cut it down too much to
get it to run well. Beyond that, any docs concerning paring down a
linux install will be applicable.
|
My 2c is Gentoo; it's ideal for servers and can be kept pared down
(like Debian, the base install is already small).
| Quote: |
Thanks! Hope you don't mind a newbie on the list.
Just to be pedantic, it's a newsgroup, not a list. Good luck!
--keith
--
kkeller-usenet@wombat.san-francisco.ca.us
(try just my userid to email me)
AOLSFAQ=http://wombat.san-francisco.ca.us/cgi-bin/fom
see X- headers for PGP signature information |
|
|
| Back to top |
|
|
Lawrence D'Oliveiro
*nix forums Guru
Joined: 25 Mar 2005
Posts: 723
|
| Posted: Sun Apr 16, 2006 11:40 am Post subject:
Re: Help choosing a distribution
|
|
|
In article <6vv8e3x67j.ln2@goaway.wombat.san-francisco.ca.us>,
Keith Keller <kkeller-usenet@wombat.san-francisco.ca.us> wrote:
| Quote: | The first
(not knowing off the top of my head model numbers) will be whether the
processor is PPC or not. If the machines are *really* old, running the
68000 series processor, forget about all these distros, which are only
for the powerpc.
|
For reference, 3-digit model numbers => 68K, 4-digit model numbers =>
PowerPC. |
|
| Back to top |
|
|
Google
|
|
| Back to top |
|
|
|
|
The time now is Wed Dec 03, 2008 2:04 am | All times are GMT
|
|
Power Rangers | Novela cuerpo deseo | Loans | Credit Cards UK | Web Advertising
|
|
Copyright © 2004-2005 DeniX Solutions SRL
|
|
|
|
Other DeniX Solutions sites:
Unix/Linux blog |
electronics forum |
medicine forum |
science forum |
|
|
Privacy Policy
|
Powered by phpBB © 2001, 2005 phpBB Group
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
Forum index
»
*nix
»
Linux
»
powerpc
