intel 3d accel

Lubos Vrbka · *nix forums Guru Wannabe Joined: 02 Aug 2005 Posts: 136

hi,

that's not a program, it's just a definition of an environment variable
'LIBGL_DEBUG' with value 'verbose', that will be applied only to this
single command.

just try to execute the line i wrote - it should work without any problems.

regards,

--
Lubos _@_"
http://www.lubos.vrbka.net

--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Lubos Vrbka · *nix forums Guru Wannabe Joined: 02 Aug 2005 Posts: 136

hi,

A B · *nix forums beginner Joined: 19 Jul 2006 Posts: 7

Sorry for sending You privat mail, i apologised in the letter i sent to the list, but sorry again.
I didn' t it is html mail, but now i hope it' ll be normal plain text. I don' t like html mails, too.

Sorry, but i didn' t understand what You mean under:
LIBGL_DEBUG=verbose glxinfo
What are You interested in? How can i give You that information?
What glxinfo, and glxinfo -v say, i put to 12E7041.ath.cx/g40/
When i start glxgears, certainly it eats all the cpu :- (.

thanks for Your help.

_________________________________________
Hírkeresõ.hu - Mindig friss hírek, toplisták, sztárpletykák. A legfontosabb 70 hírforrás közel 2.500 cikke naponta!Ha egy lapon akarsz mindent áttekinteni KLIKK IDE! - http://www.hirkereso.hu/

Lubos Vrbka · *nix forums Guru Wannabe Joined: 02 Aug 2005 Posts: 136

hi,

first - please don't send html formatted e-mails to the list, plain text
is much better. i was almost unable to read your mail, since it was full
of 'nbsp; tags'
second - there's no need to cc me on replies, i read the list

and now - everything looks fine, modules loaded, xorg reports the card -
so it's strange. what does
LIBGL_DEBUG=verbose glxinfo
say?

regards,

--
Lubos _@_"
http://www.lubos.vrbka.net

--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

A B · *nix forums beginner Joined: 19 Jul 2006 Posts: 7

Hi!Now i don' t have compiled kernel, just what etch offers (2.6.17-1-486), and i have installed linux-headers-2.6.17-1-486 .Here is my lsmod:Module                  Size  Used byi915                   16256  1 drm                    59924  2 i915nvram                   7304  1 ipv6                  210784  10 button                  6544  0 ac                      4868  0 battery                 9220  0 md_mod                 66068  0 dm_mod                 48568  0 pcmcia                 33468  0 firmware_class          9344  1 pcmciahw_random               5528  0 snd_intel8x0           29596  2 shpchp                 33816  0 8250_pci               19840  0 pci_hotplug            26420  1 shpchpsnd_intel8x0m          15628  0 snd_ac97_codec         82336  2 snd_intel8x0,snd_intel8x0msnd_ac97_bus            2304  1 snd_ac97_codecsnd_pcm_oss            35616  0 snd_mixer_oss          15616  1 snd_pcm_ossi2c_i801                8204  0 snd_pcm                71432  4 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_osssnd_timer              19716  1 snd_pcmsnd                    45668  11 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timeryenta_socket           23948  1 rsrc_nonstatic         11904  1 yenta_socketpcmcia_core            36368  3 pcmcia,yenta_socket,rsrc_nonstaticparport_pc             31396  0 parport                31944  1 parport_pcpsmouse                34184  0 floppy                 52868  0 i2c_core               19216  1 i2c_i801soundcore               8800  1 sndpcspkr                  2816  0 intel_agp              21020  1 agpgart                29232  3 drm,intel_agpserio_raw               6276  0 evdev                   8960  1 mousedev               10400  1 tsdev                   7360  0 rtc                    11444  0 snd_page_alloc          9480  3 snd_intel8x0,snd_intel8x0m,snd_pcmext3                  114952  1 jbd                    45588  1 ext3usbhid                 34016  0 ide_generic             1408  0 [permanent]ide_cd                 35104  0 cdrom                  32288  1 ide_cdide_disk               14976  3 uhci_hcd               19464  0 ehci_hcd               26888  0 piix                    9220  0 [permanent]usbcore               108544  4 usbhid,uhci_hcd,ehci_hcdgeneric                 4356  0 [permanent]ide_core              107940  5 ide_generic,ide_cd,ide_disk,piix,generictg3                    91396  0 thermal                12680  0 processor              21440  1 thermalfan                     4484  0 my xorg.conf' s parts:Section "Module"        Load    "i2c"        Load    "bitmap"        Load    "ddc"           Load    "dri"           Load    "extmod"        Load    "freetype"        Load    "glx"        Load    "int10"        Load    "type1"        Load    "vbe"          Load    "dbe"  EndSectionSection "Device"        Identifier      "Intel Corporation 82852/855GM Integrated Graphics Device"        Driver          "i810"        BusID           "PCI:0:2:0"        Option          "AGPMode"               "1"        EndSectionSection "Screen"        Identifier      "Default Screen"        Device          "Intel Corporation 82852/855GM Integrated Graphics Device"        Monitor         "Generic Monitor"        DefaultDepth    16....my Xorg.0.log is here: 12E7041.ath.cx/g40/ (too long to post here).I bet the neccessary modules are already presented as modules.dpkg -l | grep -i 810 say:ii  xserver-xorg-video-i810          1.5.1.0-2                    X.Org X server -- Intel i8xx, i9xx display dso it is there, too :- ).well, i bet i did everything, but still:glxinfo | grep -i rendering | grep -i dirdirect rendering: NoI hope You or someone can help me. All neccessary information is at 12E7041.ath.cx/g40/Thanks for the help.p.s.: sorry for the private message, i didn' t check what was in the 'To:' form.

_________________________________________
Hírkeresõ.hu - Mindig friss hírek, toplisták, sztárpletykák. A legfontosabb 70 hírforrás közel 2.500 cikke naponta!Ha egy lapon akarsz mindent áttekinteni KLIKK IDE! - http://www.hirkereso.hu/

Lubos Vrbka · *nix forums Guru Wannabe Joined: 02 Aug 2005 Posts: 136

hi,

A B · *nix forums beginner Joined: 19 Jul 2006 Posts: 7

Hi!

I have an intel graphics card, and i' d like to have 3d acceleration on
it. I have debian stable and testing, too, so i' d be interested in
both (xorg and xfree too, but certainly xorg is more important).

lspci say:

0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 01)
0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 01)
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 01)
0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 01)
0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 01)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5901 100Base-TX (rev 01)
0000:02:01.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)

So i' d like to ask what is the "standard" way to get 3d accel on debian etch/ sarge.

The card sure can use 3d accel, cuz just for test i installed a fedora,
and without doing anything, there was 3d acceleration on it.

What driver should i download it for it, and which part of it should i
install. What is neccessary. I have download from intel.com what i' ve
found, but i didn' t have success with it.

My computer is an ibm thinkpad g40 laptop.

Thanks for the answers.

_________________________________________
Hírkeresõ.hu - Mindig friss hírek, toplisták, sztárpletykák. A legfontosabb 70 hírforrás közel 2.500 cikke naponta!Ha egy lapon akarsz mindent áttekinteni KLIKK IDE! - http://www.hirkereso.hu/

Google